Question 1

What is the average cost to fix a furnace?

Accepted Answer

The average cost to fix a furnace varies by the fault and parts required; McCullough Heating & Air Conditioning confirms final pricing after an on-site diagnosis. We start with a $79 diagnostic, often waived when you move forward with the repair, then present upfront pricing for the exact fix. The most common charges we see are for ignition or blower-related components, while safety issues like a compromised heat exchanger can drive a replace-not-repair decision. We often find a dirty flame sensor can mimic a bigger failure, saving money when cleaned rather than replaced. Our technicians see these patterns throughout the Austin area each heating season. What most affects repair price: - Part type and availability - Labor time and furnace accessibility - System age and maintenance history - Warranty coverage and any after-hours needs Schedule a diagnostic promptly if you have no heat or ongoing shutdowns to prevent further damage.
Updated: 2026-08-27
Need help in Barton Creek, TX? Call (512) 588-5937 or book online.

Question 2

What Is the Average Furnace Repair Cost for Homeowners?

Accepted Answer

The average furnace repair cost is not one fixed number—McCullough Heating & Air Conditioning provides pricing after an in‑home diagnosis based on the part required, labor, and system condition. The most common cost drivers we see are ignition problems and blower issues, which range from simple electrical fixes to more involved component replacements. Severity and safety needs determine whether it’s a quick repair or a larger job. Our technicians serving the Barton Creek area also see costs vary with system age, maintenance history, and any active warranties. We also keep it simple with upfront estimates, and the diagnostic fee is waived when you proceed with the repair. Expect the estimate to reflect: - Specific component replaced or serviced (igniter, blower motor, control board, thermostat) - Airflow or duct-related corrections that increase labor time - System age, access, and any code or safety updates - Warranty coverage and parts availability For a precise price, schedule a diagnosis so a licensed technician can quote the repair before any work begins.
Updated: 2026-07-04
Need help in Barton Creek, TX? Call (512) 588-5937 or book online.

Question 3

Why Is My AC Running But Not Cooling Properly?

Accepted Answer

An AC that runs but isn’t cooling usually means restricted airflow or a refrigerant or control issue rather than a total system failure. The most common culprit is a clogged air filter that chokes airflow and lets coils get too cold to move heat. A mis-set thermostat, a blocked outdoor condenser, or low refrigerant from a leak can also drop cooling performance. A quick technician check is measuring temperature drop between a return grille and a nearby supply; a poor delta hints at airflow or charge problems. Our technicians see this often in Georgetown homes as heat and dust build early in the season. Before you call, check these quick items: - Replace a dirty filter and open all supply/return vents. - Set thermostat to Cool and Auto, and verify the setpoint is several degrees below room temp. - Clear debris from the outdoor unit and gently rinse the coil fins from the outside. - If you see ice on lines, hear hissing, or smell burning, turn the system off and schedule service. If these steps don’t restore cooling after about an hour of steady run time, book a professional diagnostic to prevent larger damage.
Updated: 2026-06-26
Need help in Georgetown, TX? Call (512) 588-5937 or book online.

Question 4

How much does HVAC repair typically cost for homeowners?

Accepted Answer

At McCullough Heating & Air Conditioning, HVAC repair pricing is confirmed after an on-site diagnostic, because total cost depends on the failed part, labor time, and system type. Most homeowners see costs driven by parts availability and whether the issue is electrical, airflow, or refrigerant-related. We service the greater Austin area, including Rollingwood homes with both newer and older systems. If a unit is near the end of its life and needs a major component, we’ll explain repair versus replacement with transparent pricing so you can choose with confidence. We also offer a FREE 2ND OPINION ON REPAIRS with a recent competitor quote. Key factors that change repair price: - Specific component required (capacitor, blower motor, control board, etc.) - Refrigerant work, leak search, or recovery needs - Attic or rooftop access that extends labor time - Warranty coverage and age of equipment If the system trips a breaker or you smell burning, turn it off and schedule a diagnostic right away.
Updated: 2026-06-20
Need help in Rollingwood, TX? Call (512) 588-5937 or book online.

Question 5

Why Is My Air Conditioner Running But Not Cooling Properly?

Accepted Answer

An air conditioner running but not cooling properly usually points to weak airflow or a refrigerant problem. The most common cause is a clogged air filter or a dirty outdoor condenser coil that can’t dump heat. Other culprits include a frozen evaporator coil, thermostat misreadings, blocked supply/return vents, or duct leaks that spill cold air into the attic instead of your rooms. Low refrigerant from a leak will let the system run but removes far less heat, and prolonged operation can overheat the compressor. A half-clogged return filter can drop airflow enough to ice the coil even when the blower sounds normal. Our technicians see this often in homes we service around Cedar Park during peak heat. Quick checks you can do before a service visit: - Replace a dirty filter and open closed vents - Rinse debris from the outdoor unit’s fins (power off first) - Set thermostat to Cool, Fan Auto, and verify temperature drop - Clear a full condensate drain if the air handler stopped If you see ice on the refrigerant lines, turn the AC off and run the fan to thaw before restarting.
Updated: 2026-05-16
Need help in Cedar Park, TX? Call (512) 588-5937 or book online.

Question 6

Why Is My AC Running But Not Blowing Cold Air?

Accepted Answer

An AC that runs but isn’t blowing cold air usually points to airflow restrictions, incorrect settings, or a refrigeration issue inside the system. The most common root cause is a dirty filter or blocked coil that prevents heat from leaving the air stream. A system can hum along and still warm your house if the indoor coil is iced over or the outdoor unit can’t shed heat; techs call this “airflow-starved cooling,” and it’s fixable once the restriction is cleared. If the outdoor fan isn’t spinning or you see frost on the lines, shut it down to protect the compressor. Our team regularly resolves these scenarios for homeowners in the West Lake Hills area. Ask about our current Free Service Call with Repair promotion when you schedule. Before you book, check these quick items: - Thermostat set to Cool, Fan on Auto, and target temperature below room temp - Clean or replace the air filter - Make sure the outdoor unit has power and clear airflow - Look for ice on refrigerant lines or the indoor coil Turn the system off at the thermostat if you find ice or no outdoor fan movement, then schedule professional diagnostics.
Updated: 2026-04-05
Need help in West Lake Hills, TX? Call (512) 588-5937 or book online.

Frequently Asked Questions

HVAC Repair